Edit Scanned Document Source
|
Edit Scanned Document Source |
|
|
|
|
Editing a scanned document source (machine access definition) within the load definition file in the Load Definition File editor consists of the following steps:
Step 1
The first step is to select the Document Sources task in the DEFINITIONS task bar along the left side of the load definition file editor to activate the SCANNED DOCUMENT SOURCES page if it isn't already activated.
Step 2
The second step is to either double-click the machine access definition to be edited or select the machine access definition and click the Edit SDS task in the S D SOURCES task bar along the right side of the SCANNED DOCUMENT SOURCES page:
The Edit Machine Access Definition dialog box will appear:
The Edit Machine Access Definition dialog box is composed of the following components:
|
Component |
Description |
|
Machine Name |
Use the Machine Name edit box to specify the name of the machine access definition. |
|
IP Address |
Use the IP Address edit box to specify the address of the machine containing the documents and upon which the satellite applications DirList and ScanDoc are running. |
|
DirList Port |
Use the DirList Port edit box to identify the port used to access DirList for the purpose of returning a list of documents to be scanned. |
|
ScanDoc Port |
Use the ScanDoc edit box to identify the port used to access ScanDoc for the purpose of returning data for storage and indexing from scanned documents. |
Step 3
The third step is to edit the information that needs to be changed. In this case the name of the machine access definition has been changed:
After the information has been edited, click the OK button to apply the changes.
The machine access definition has been edited.
|
|
|
